Friday, September 6, 2019
Distribution Channel of Banas Dairy Essay Example for Free
Distribution Channel of Banas Dairy Essay The present study is conducted in the Banas Dairy sales area Genesis of Banas Dairy Late ShriGalbhabhai Patel established Banas Dairy with the dream of uplifting socio economic status of village farmers. This dream was fulfilled through the creation of a co-operative milk union for Banaskantha district, on the footprint of ââ¬Å"Amul Dairyâ⬠of Kaira district, the ideal model of a Co-operative. Consequently eight village level co-operative milk societies in Vadgam and Palanpur taluk Ire registered and started collecting and pouring milk at DudhSagar Dairy, Mehsana from 3rd October 1966. The milk union got registered under Co-operative act on 31st January 1969 as Banaskantha District Co-operative milk producersââ¬â¢ Union Limited, popularly known as Banas Dairy. The foundation stone was laid by Late Galbabhai Nanjibhai Patel on 14th January 1971 at 122 acres land acquired near Jagana village in order to set up a dairy plant under the operation flood program launched by national Dairy development Board. On 7th May 1971ââ¬â¢ the dairy started functioning at the same place with a capacity of 1. 5 lakh liters of milk per day. This has now been increased to 24. 3 lakh liters per day. The dairy has three automated plants with a wide 8-9 product lines. The small dream of Shri Galbabhai has now taken the shape of a co-operative of 1350 societies with around 15000 members. With the relentless efforts of dedicated and committed leadership, the dairy has won the trust of milk producers of Banaskantha district and has brought about a happy change in the lives of all its members. It has come up as a major revolution in the upliftment of the residents of the district. Mission and Vision Banas District Cooperative Milk Producers Union Ltd. was established with the prime objective of eliminating the monopoly of private traders and providing the poor farmers the due that they deserve. Along with this it also ensures that the farmers are benefited the maximum out of their operations and activities. The mission of the organization is to provide sustainable means of livelihood to socio-economically downtrodden rural mass, while treading on the path of progress. The organization renews its vision every ten years. It strives to be a successful world class co-operative dairy. The objectives of the organization are clearly expressed through the quality policy, which states that: ââ¬Å"I, the Banas Dairy, commit and aspire to fulfil the needs and expectations of our internal as Ill as external customers and delight them through our quality products and services. I shall achieve the goal through the followings: a). Applying principles of Quality Management Systems and Food Safety Management for continuous enrichment of our management processes. ). Providing remunerating returns, quality input services, introducing innovative and appropriate schemes and services to our milk producers. c). Motivating and providing and encouraging appropriate training for skill up-gradation of our employees. d). Protecting our value system and the environment by judicious use of all natural resources. â⬠India is an agri- oriented country of the world. 70% people are living in rural area so I can say Indian peo ple are living in village the majority of population. The dream of late Galbabhai Patel, founder chairman and the selfless sage to uplift socio- economical status of village farmers came true after creation of a co- operative milk union for banaskantha district, on the foot print of ââ¬Å"Amul Dairyâ⬠of kaira presently Anand) district on the model of true co operative milk societies in Vadgam and palanpur taluzka of district Ire registered and started collecting and pouring milk at Dudh Sagar dairy, Mahesana from 10th march 1969.
Thursday, September 5, 2019
Recognition Properties for Pyrrole
Recognition Properties for Pyrrole Preparation of molecularly imprinted polymer and its recognition properties for pyrrole X.W. Wu, J. Wang, H.X. Wangà [1], Q.M. Zhou, L.H. Liu. wang, Y.P. Wu, H.W. Yang, G.L. Zhao, S.X. Tuo Abstract: The molecularly-imprinted polymer (MIP) of pyrrole was synthesized by a precipitation polymerization method using acrylamide (AM) as functional monomer and ethylene glycol dimethacrylate (EGDMA) as cross-linker agent in acetonitrile. MIP of pyrrole was characterized by FT-IR and UV. The surface morphology and specific surface area of the MIP was characterized by Scanning Electron Microscope (SEM) and nitrogen adsorption (BET). The adsorption behavior of the MIP was investigated in detail, which showed high selectivity for pyrrole, the results indicated that the maximum binding capacities of pyrrole on the MIP and the non-imprinted polymer (NIP) were 404 and 265 à ¼molÃŽâ⬠¡gâËâ1, respectively. Application of MIP with a high selectivity to pyrrole provides a novel method for separating and purifying the trace nitrogenous heterocyclic compounds from tobacco. Keyword: molecularly imprinted polymer, pyrrole, tobacco, nitrogenous heterocyclic compounds 1 INTRODUCTION The Pyrrole and other nitrogenous heterocyclic compounds in tobacco leaves come mainly from the reaction products formed by the reaction of sugar and amino acid[1-3], which play an important role in sensory quality of tobacco and tobacco products. They are the important parameters to evaluate the sensory quality of tobacco products and have great effects on the sensory characteristics of tobacco products and on the health of smokers[4]. Therefore, the studies and analysis of nitrogenous heterocyclic compounds are conducive to improve the quality of perfuming and tobacco products. Molecular Imprinting, as an interdiscipline derived from polymer chemistry, material science, and biological chemistry, is the method of preparing the polymer with particular selection to given template molecules[5-8]. So far, dozens of countries, (i.e., America, Japan, Germany, Australia, France and China) hundreds of academic institutions and enterprises have been working on the research and development of the molecularly imprinted polymer (MIP).Thanks to MIP is simple in preparation and can be easily preserved, with specific selectivity, high temperature, high pressure and acid corrosion, it has been widely used in the solid phase extraction[9], chromatography analysis [10], membrane separation [11], biomimetic sensor[12], ect. The separation of bioactive ingredients in natural products is difficult because of their low contents, complex structures and diversity[13-15]. Compared with traditional methods (high performance liquid chromatography, silica gel column chromatography, etc.), molecular imprinting method has the advantages of high molecular recognition, simple operation, low solvent consumption and recyclable[16]. Thus, the molecularly imprinting technique has attracted considerable attention for extraction of compounds from complex mixtures of chemical species[17-18]. However, to the best of our knowledge, no molecularly imprinted polymer has been reported for the separation and determination of pyrrole in tobacco so far. In this study, pyrrole imprinted polymer was synthesized by employing acrylamide (AM) as functional monomer and ethylene glycol dimethacrylate (EGDMA) as crosslinking. After the characteristics and analysis of the MIP and NIP, the adsorption behavior including kinetics and isotherms are discussed in detail. It was found that the MIP can specifically adsorb and identify pyrrole molecules, which meant the MIP can be applied to separation and enrichment of trace pyrrole in tobacco. The aim of this paper is to provide theoretical basis and technical supports for further study of the effects of nitrogen heterocyclic compound on tobacco quality. 2 EXPERIMENTAL 2.1 Reagents Pyrrole, pyridine and methanol were obtained from Sinopharm Chemical Reagent Co., Ltd. (Shanghai, China). Acrylamide, methacrylic acid, acetonitrile and azodiisobutyronitrile were purchased from Tianjin Kermel Chemical Reagent Company (Tianjin, China). Ethylene glycol dimethacrylate was obtained from Aladdin reagent co., LTD (Guangdong, China). All the solvents were of analytical reagent grade and used without further purification. 2.2 Synthesis of MIP and NIP The pyrrole imprinted polymer was prepared by precipitation polymerization in the following procedures. 0.1 mmol of pyrrole and 0.4 mmol of AM were dissolved in 20 ml of acetonitrile in a 40 mL glass vessel. The mixture was sonicated at room temperature for 30 minutes for pre-polymerization, and then was incubated at 4à ¢Ã¢â¬Å¾Ãâà °C for 12 h. Subsequently, 2 mmol of cross-linker (EGDMA) and 10 mg of initiator (AIBN) were added stepwise. The glass vessel was degassed in a sonicating bath for 10 min, and filled with nitrogen for 30 min, and then sealed for polymerization at 60 à °C for 24 h in a thermostat water bath. After polymerization, the resultants were extracted with a mixed solvent of methanol/acetic acid (9:1, v/v) for 48 h in a Soxhlet extractor to remove the template from its polymeric matrix, followed by ethanol for another 48 h to remove the acetic acid. The obtained MIP was dried in an oven at 60 à °C overnight. As a control, the NIP was prepared and treated unde r identical conditions except for the omission of the template. 2.3 Morphological characterization The FT-IR spectra were recorded to characterize the MIP and NIP on an AVATAR 360 ESP FT-IR spectrometer (Nicolet, America). SEM images were obtained with afield-emission scanning electron microscope (FE-SEM, JSM-6700F, JEOL, Japan). The nitrogen adsorption/desorption data of MIP and NIP was determined using an ASAP2020Micromeriticsapparatus (Micromeritics Instruments, USA). 2.4 Binding experiments The binding experiments were carried out at 30 à °C and 150 rpm on an orbital shaker with 100 mg of the MIP and NIP in a 100 mL flask containing pyrrole in 20 ml of acetonitrile. Batch experiments were performed to examine the adsorption kinetics and equilibrium. In the kinetic adsorption experiments, 2.5 mmolÃŽâ⬠¡L-1 pyrrole in acetonitrile was used. The adsorption isotherm experiments were conducted with the initial pyrrole concentration ranging from 0.2 to 5.0 mmolÃŽâ⬠¡L-1 for 2 h. After the adsorption, the concentration of the substrates in the supernatant solutions was determined via an UV-2450 Ultraviolet Spectrophotometer (Shimadzu, Japan). The binding capacity of pyrrole and the analogs was calculated from the equation: (1) Where: Q stands for the binding capacity (à ¼molÃŽâ⬠¡gâËâ1), C0 and C are the initial and the residual concentrations (mmolÃŽâ⬠¡L-1) of pyrrole, respectively, V is the solution volume (mL), and m is the amount (mg) of the MIP or NIP used for the adsorption experiments. 3 RESULTS AND DISCUSSION 3.1 Interaction between pyrrole and the functional monomers In order to investigate the feasibility of imprinted pyrrole, two different functional monomers MAA and AM were investigated for the formation of complex with the template. The maximum absorption wavelength of pyrrole was measured by the UV-2450 Ultraviolet Spectrophotometer. As shown in Fig.1, compared with MAA, AM demonstrated much stronger interaction with pyrrole for the non-existent absorbance of pyrrole. It is possible that the complex of pyrrole with AM was formed via hydrogen bonding between Nââ¬âH of pyrrole and ââ¬âCONH2 of AM due to the pre-polymerization. Fig.1 Interaction between pyrrole and functional monomers 3.2 The molar ratio of pyrrole to the monomer In order to elucidate the recognition mechanism on a molecular level, spectrophotometric analysis was employed in the pyrrole imprinting process. A series solution were prepared in acetonitrile, in which the molar ratio of pyrrole and AM varied at 1:0, 1:2, 1:4 and 1:6, respectively. After equilibrium for 12 h, absorption spectrums of the mixture were measured via an UV-2450 Ultraviolet Spectrophotometer. As shown in Fig.2, the absorbance decreased with the increasing concentration of AM, When the molar ratio of pyrrole and AM up to 1:4, the absorption peak of pyrrole disappeared, which indicated that the pyrrole had reacted with AM completely. While molar ratio of pyrrole and AM exceeded 1:4, the excess of AM could self-associate, and formed non-specific binding site, which makes the adsorption mass transfer resistance increase and is not conducive to the preparation of molecularly imprinted polymer. Therefore, the optimal molar ratio of pyrrole and AM is 1:4. Fig.2 Absorption spectra of pyrrole with different proportion of AM in acetonitrile 3.3 Characteristics of MIP and NIP 3.3.1 Characterisation of MIP and NIP by FT-IR spectra Pyrrole, AM, EGDMA, MIP (before and after eluting templates) and NIP were compared to affirm the successful preparation of MIP by FT-IR spectra. The FT-IR spectra of the MIP before and after removal of template pyrrole are presented in Fig.3a and Fig.3b, respectively. The ââ¬âNH stretching vibration band of monomer AM (Fig.3e) appeared at 3580 cm-1 in the spectra of MIP before pyrrole removal (Fig.3a), which indicated that the template pyrrole formed hydrogen bonding interaction with monomer AM, this band is shifted to a higher wavenumber (at 3585 cm-1) after removal of pyrrole in MIP (Fig.3b). A conspicuous band at 1648 cm-1 in the spectra of MIP before removal of template pyrrole is ascribed to -C=C- aromatic ring stretching vibration of pyrrole (Fig.3d). This band disappeared after removal of pyrrole in MIP (Fig.3a) and was not observed in spectra of NIP (Fig.3c) due to absence of pyrrole. The peak at 3597cm-1 inFig.3c corresponds to the ââ¬âNH stretching of monomer AM in the FT-IR spectra of NIP. The absorption peaks of MIP and NIP were similar, which means that both MIP after eluting templates and NIP have the same chemical components. Fig.3 IR spectra of (a) MIP before eluting template, (b) MIP after eluting template , (c) NIP, (d) pyrrole, (e) AM 3.3.2 Morphology of MIP and NIP The morphology of MIP and NIP was shown in Fig.4. As shown in Fig.4 (a), the prepared polymer is microsphere and the particle is uniform, which indicated the spherical particle can be synthesized at the best experiment condition. The MIP microsphere has a narrow and small particle size, and the average diameter is 2à ¼m. As for NIP, the microsphere with a narrow but big particle size, and the average diameter is 3à ¼m. Much imino exist in the template molecule, which may suppress the polymerization, results in the bigger particle size of NIP compared with MIP. Besides, the whole reaction system polarity increased with the added template molecule, the solubility of MIP decreased, so that MIP precipitated from the whole reaction system early, which can also generate the bigger particle size of NIP. Fig.4 SEM micrographs of (a) MIP, (b) NIP. 3.3.3 Characterization of specific surface area Table 1 lists the results of nitrogen adsorption experiments for MIP and NIP particles. It can be seen that the specific surface area and the average pore diameter were different for MIP and NIP particles. Table1 Structure parameters of MIP and NIP a Measured by Brunauerââ¬âEmmettââ¬âTeller (BET) method. b Measured by Barrettââ¬âJoynerââ¬âHalenda (BJH) method. 3.4 Binding performance of MIP and NIP 3.4.1 Absorption isotherms and kinetic of pyrrole on the MIP and NIP The absorption isotherm curves of pyrrole on the MIP and NIP were plotted in Fig.5. The absorption capacity was increased gradually with increasing initial concentration of pyrrole in the range of 0.2-5.0 mmolà ·LâËâ1. In the higher concentration range, the binding capacity was close to be stable. The binding data can be analyzed by Langmuir equation: (2) Where Q stands for the binding capacity (à ¼molÃŽâ⬠¡gâËâ1), Qmax is the maximum binding capacity (à ¼molÃŽâ⬠¡gâËâ1), Ceq is equilibrium concentration of pyrrole (mmolà ·LâËâ1), and B is a constant. In order to calculate the maximum binding capacity of pyrrole on both MIP and NIP, this equation was changed into Eq. (3): (3) Eq. (3) shows a linear relationship between Ceq/Q and Ceq. From the slope of the linear plot, the maximum binding capacities of pyrrole on the MIP and NIP were calculated to be 404 and 265 à ¼molÃŽâ⬠¡gâËâ1, respectively, which means that the maximum binding capacity of pyrrole on MIP was 1.52 times of that on NIP. In addition, under the same experimental conditions, the adsorption capacity of the MIP at each concentration was higher than that of the NIP. It was indicated that MIP offered a higher affinity for the template molecule than NIP. Fig.5 Adsorption isotherms of pyrrole on MIP and NIP 3.4.2 Binding kinetic curve of pyrrole pyrrole on the MIP As shown in Fig.6, the adsorption kinetic curves of pyrrole on MIP and MIP were shown at the pyrrole concentration of 2.5 mmolà ·LâËâ1 in acetonitrile. It can be seen that the binding capacity of MIP increased rapidly in the period of 0-60 min, and then the increments were reduced on the stage of 60-80 min, and the saturated binding was observed after 80 min. Fig.6 Adsorption kinetic curves of pyrrole on MIP and NIP 3.4.3 Selective adsorption In the selective adsorption test, the target molecule pyrrole and the competitive one pyridine possess similar structure and co-exist in tobacco extract as nitrogenous heterocyclic compounds. As we can see in Table 2, it is obvious that the absorption capacity of pyrrole and pyridine of MIP was much higher than that of the NIP. The selectivity of MIP was 2.17 times higher than that of NIP, which suggested that the imprinting process significantly improved adsorption selectivity to the template. Table 2 Binding capacity of different substrates on MIP and NIP 4 CONCLUSIONS In this paper, the pyrrole molecularly imprinted polymer was synthesized via the facile precipitation-polymerization method. The prepared polymer is microsphere and the diameter is about 2 à ¼m. The binding property experiments indicated the imprinted polymer can adsorb the pyrrole molecule selectively. Moreover, the adsorb effect of MIP is stronger than NIP. The selective adsorption experiments demonstrated the synthesized MIP microsphere has the obvious selective adsorption effect with pyrrole molecule when compared the similar structure pyridine. This work provided theoretical basis for the new direction of separation and purification in the field of tobacco with pyrrole and other heterocyclic compounds. 5 ACKNOWLEDGEMENT This work was supported by China Tobacco Hunan Industrial Co., Ltd, Technology research and development center project (2011-JC-0001) REFERENCES Kulshreshtha, N. P., Moldoveanu, S. C. (2003). Analysis of pyridines in mainstream cigarette smoke. Journal of Chromatography A, 985(1), 303-312. Leffingwell, J. C., Alford, E. D. (2005). Volatile constituents of perique tobacco. Electronic Journal of Environmental, Agricultural and Food Chemistry, 4(2), 899-915. Duan, J., Huang, Y., Li, Z., Zheng, B., Li, Q., Xiong, Y., Min, S. (2012). Determination of 27 chemical constituents in Chinese southwest tobacco by FT-NIR spectroscopy. Industrial Crops and Products, 40, 21-26. YU, J. J., PANG, T. H., REN, X. H., LI, L., DAI, H. J., LI, A. J. (2006). Research on Relationship between Neutral Aroma Constituents and Smoking Quality in Flue-Cured Tobacco [J]. Journal of Henan Agricultural University, 4, 001. Mosbach, K. (1994). Molecular imprinting. Trends in biochemical sciences, 19(1), 9-14. Andersson, L. I. (2000). Molecular imprinting: developments and applications in the analytical chemistry field. Journal of Chromatography B: Biomedical Sciences and Applications, 745(1), 3-13. Bures, P., Huang, Y., Oral, E., Peppas, N. A. (2001). Surface modifications and molecular imprinting of polymers in medical and pharmaceutical applications. Journal of Controlled Release, 72(1), 25-33. Piletsky, S. A., Alcock, S., Turner, A. P. (2001). Molecular imprinting: at the edge of the third millennium. TRENDS in Biotechnology, 19(1), 9-12. Zhang, W., Chen, Z. (2013). Preparation of micropipette tip-based molecularly imprinted monolith for selective micro-solid phase extraction of berberine in plasma and urine samples. Talanta, 103, 103ââ¬â109. Ebrahimzadeh, H., Dehghani, Z., Asgharinezhad, A. A., Shekari, N., Molaei, K. (2013). Determination of haloperidol in biological samples using molecular imprinted polymer nanoparticles followed by HPLC-DAD detection. International journal of pharmaceutics, 453(2), 601-609. Ulbricht, M. (2004). Membrane separations using molecularly imprinted polymers. Journal of chromatography B, 804(1), 113-125. Sergeyeva, T. A., Slinchenko, O. A., Gorbach, L. A., Matyushov, V. F., Brovko, O. O., Piletsky, S. A., Elska, G. V. (2010). Catalytic molecularly imprinted polymer membranes: Development of the biomimetic sensor for phenols detection. Analytica chimica acta, 659(1), 274-279. Colegate, S. M., Molyneux, R. J. (Eds.). (2007). Bioactive natural products: detection, isolation, and structural determination. CRC press. Mishra, B. B., Tiwari, V. K. (2011). Natural products: an evolving role in future drug discovery. European journal of medicinal chemistry, 46(10), 4769-4807. REN, Q., XING, H., BAO, Z., SU, B., YANG, Q., YANG, Y., ZHANG, Z. (2013). Recent Advances in Separation of Bioactive Natural Products. Chinese Journal of Chemical Engineering, 21(9), 937-952. Cheong, W. J., Yang, S. H., Ali, F. (2013). Molecular imprinted polymers for separation science: A review of reviews. Journal of separation science, 36(3), 609-628. Hu, Y., Pan, J., Zhang, K., Lian, H., Li, G. (2013). Novel applications of molecularly-imprinted polymers in sample preparation. TrAC Trends in Analytical Chemistry, 43, 37-52. Andersson, L. I. (2000). Molecular imprinting for drug bioanalysis: a review on the application of imprinted polymers to solid-phase extraction and binding assay. Journal of Chromatography B: Biomedical Sciences and Applications, 739(1), 163-173. 1 [1]E-mail:[emailprotected]; [emailprotected]; [emailprotected]
Looking At The Future Of Civil Engineering Construction Essay
Looking At The Future Of Civil Engineering Construction Essay It is very important for civil engineers of this generation to understand the responsibility of their profession in the perspective of the environment and society, and in the understanding this responsibility they must try to generate changes in their action and thinking. This can be successful but everyone has to be involved needs to support and encourage the sustainable thinking, this change can come through design and construction processes. Design sustainability is not an easy route as it must be applied in every design theory. Starting from the conception of the design and moving to the location, the structural materials, the structural methods and finally the possible demolition of the project, design sustainability have to be applied in many areas. On the other hand sustainable construction must aim to use less natural materials and materials which are dangerous to the environment, also less energy to cut the amount of the waste and reduce the environmental pollution without negotiating the quality of the project. Sustainable thinking, planning and acting must be involved in civil engineering to reduce the environmental effecting projects have over their whole design life. Only in the course of this process, and by implementing sustainable thinking at every phase in a project, can a set of ideologies to improve the quality of life be created. The economic component of sustainability has been the main driver of projects. As civil engineering considering the sustainability issues we need to consider more than today alone. It is vital to account for cost over a whole life cycle and the impact on the future development. These costs must be considered in tandem with the social consequences and environmental impacts. The social aspect of sustainability is one that has only recently come to the forefront, but has this not been part of the civil engineer`s role for many years. [1] The influence of engineers of the past and present has had wide- ranging social benefits in transportation, natural and physical security, safety, resource management and heritage, all of which improve the quality of life. The social benefits of these are immeasurable but need to be considered together with the impact on the environment and the economy. [1] All the significant factors that go into the design and construction of a project must be judged, making it hard task, but we must all try in order to achieve it. Clearly, it is going to be a long and difficult method before these ideologies are established, since all the information, the assessments and the resources available to both design and construction teams develop continuously but from project to projects it will become easier. The civil engineering profession has an exceptional opening to create a progression of change that will progress and sustain the environment and our planet in the long term. These are the very actions that make civil engineering a distinctive and very important profession for our planet and for our lives. There have been several projects in the UK and around the world, which are known to be the most sustainable building in the 21st century. Their design, development, use of material and the construction is processed and analysed so careful and that they have managed to come out with successful result in all of the following projects. They are known to be the environmentally friendly and economically friendly too. IBN-DLO Wageningen, the Netherlands This building of the IBN-DLO, the institute for forestry and nature research, sets a new standard in people friendly and environmental friendly building. The building, design by architect Stefan Behisch, behaves something like a living organism, with a self-regulation capacity for its temperature and water use, a capacity which responds to the cycles of summer and winter, day and night, heat and cold, rain and drought. This building can adapt and store energy to kick in when they climate changes and it will respond to the change very quickly, this somewhat is very environmental friendly building. The materials used to make this building can be all recycled and reused in there things or other projects. The roofing is made from glass, the frame consist of galvanised steel plus a considerable proportion of extruded alumina. The glass roof has proved to be 70% cheaper than comparable normal custom-made architectural atrium roofs. The wood-framed wall, doors and window are all made from w ood which is glued on to each other rather than they being nailed. The environment advantage of this is that a much larger proportion of the tree can be utilized for quality carpentry work; secondly the amount of frame timber has been kept to a minimum. This is possible because the whole building is made of glass so there is less need of window so less wood is used. an ecological issue. Every nail you dont use goes to the benefit of the environment Stefan Behisch said this during this project. [2] ECOS- Millennium environmental centre BALLYMENA, NORTHERN IRELAND This building is used to show the world that sustainable building is very much possible. Its used as a visitor centre, parkland, environmental information library and offices. Its not only used as museum but its used in everyday life. Its landscape architecture division developed the concept of a visitor centre where the building, displayed and surrounding landscape would be integrated to communicate a central theme of environmental sustainability. These are the methods they used to make their building a sustainable and environmentally friendly building. Heat Conservation and Efficient Heat Distribution Heavy mass structure retention of heat within insulated fabric, low temperature under floor heating distributed trough structural floors, passive solar gains- through south facing glazing and ramp structure, elevated solar absorption of renewable, efficient low energy lighting used where possible and combined heat and power unit fuelled from short rotation willow coppice crop grown on site. Renewable Energy- Predicted Annual Generation Biomass combined heat and power unit, solar water collection, photovoltaic array and predicted energy generation from renewable will be 71% of total predicted energy consumption. Materials Selection Where possible, PVC is not used. Alternative materials were used for electrical conduits and cabling. Plumbing and roof membrane durable and potentially recyclable materials were used; copper, steel, and concrete. Where possible renewable were used, timer stud partitions external timber cladding timber structure and floor. All timber was FSC certified. Use of organic and mineral paints, sustainable landscape management- avoidance of fertiliser and pesticides etc. Environmental Improvements and Town Connections Construction of new pedestrian and cycle path from existing housing and estate to town centre which is increasing bio-diversity through sustainable park management. Creation of habitats through new planting. Retention of existing trees and new lake construction. [3] Matsushita Electric Industrial Co. Ltd Information and Communication Center, Japan, Tokyo The unusually shaped building represents exceptional design in many respects. The trapezoidal structure encloses a huge, 9 story high atrium. Their intension was to blending technology, people and natural ventilation, a waterfall and pond, roughly cut stone walls and rocks, a floor with pebbled surface and stepping stones and some greenery. Matsushita wanted a highly intelligent large scale building, design in amity with nature. They wanted a holistic architecture that would reflect their own technological and environmental concerns. Three most important design solution that were required were The Ireko (or shell space concept) The creation of a heterogeneous indoor environment The use of natural energy systems throughout the building Ireko is the classical concept in Japanese architecture whereby space is approached by considering the layering of one environment within the other and how they and influence one another. The theory behind this classical Japanese architecture concept is to bring nature indoor and integrated into the building as an important interstice. [4] 60L, Australia 60 is the premier green commercial building in Australia, unique in its approach to energy and water consumption, and the use of recycled and re-used materials during construction. It achieved a commercially feasible, healthy, low energy, resource-efficient workplace with minimal impact on the environment. The design of the building and their motive to make this building the most sustainable they used wide range of materials which were new, recycled or re-used in the construction of the 60L. The original building was not demolished but was partially taken apart so that existing resources could be re-used. The bricks, timber glazed partition and the old building structure was re-used. The concrete poured was 60% recycled aggregate, in this situation crushed concrete reclaimed from other buildings. Timber windows and door frames were fabricated from recycled materials, as are the other items such as reinforcing steel and carpet. Most glues, adhesives, sealants and fillers frequently used in building giving off vastly toxic gases. Used of these was minimised wherever feasible. This building is using 50% less PVC than a typical commercial building of the same size and use. Where they used new material they where advised to use renewable materials such as timber, steel, bricks and copper. T hey used appropriate technology, rather than leading edge technology. In 60L case, it has changed the way water consumption in commercial building use to happen and they take a further step in being more environmentally friendly. They minimised the demand for water by providing water efficient fixtures fittings, including water-less urinals and low flush volume toilets pans. They collected rainwater to replace 100% of normal mains water consumption whenever possible. They installed 100% on site treatment and re-use of grey- water and black-water stream to produce reclaimed water for flushing toilets pans and irrigating the roof garden and landscape. Rainfall from the roof is harvested, and then transferred into the holding tanks by the use of a Syfonic system, which uses gravity to produce a siphon effect, which means water transfer is quicker and pipe diameter can be significantly reduced. [5] Finally, through research and understand of this essay I think sustainability and environmental friendly building is not impossible with this economic condition but its a long term program because sustainability and consideration of the environment has come on top of our agenda for past 10 to 15 years while there was major damage down in the past. There is a solution to the problem but this can take lot of time. We are all observers and assistants to the frequent degradation of our local and global environment. Issues such as deforestation, global warming, waste and rising sea levels are all indication to the fact. The management of sustainable construction must integrate the four dimensions: cost, time, quality and the environment. Each of which has local, national, international and global implications. In order to do this communication is required between personal, projects and companies to ensure that lesson learned and the information gathered is passed in and used to address the issue of sustainability. Sustainability is every person`s responsibility and as engineers we have the fundamental role of ensuring projects are intertwined with the reality of sustainability. In doing so we enable the sustainability agenda to be brought to the forefront of the design and delivery of all infrastructure projects in which we are involved. This needs to be from conception to implementation as the f uture of our planet depends on addressing the current issues, ensuring that sustainable agenda is approached and that in all areas it is implemented. The construction industry is traditionally and by its very nature a high usage sector of resources. As an engineer the first introduction to the concept of sustainability was during civil engineering design. As a concept sustainability was easy to define but when it came to the actual application to the project it became more difficult. In achieving sustainable infrastructure we have the chance to use lessons learned over time from innovative high profile sustainable construction projects and to implement new and improved systems of construction to schemes in which we are involved. In the long term everyone is aware that adopting a more mature and active approach to the sustainability agenda is really the only sensible option. I do believe that it is essential that civil engineers address this issue from now and in the future to make our society, economy and environment better and stronger. We are the designers and constructors of the future infrastructure and as such have a greater responsibility to the population and indeed the environment.
Wednesday, September 4, 2019
Developments in Iraq After United States Involvement Essay -- essays r
Ask anyone about the current issues in Iraq and you will hear a multitude of answers, questions, remarks, backlash, and support for our countries involvement. Sure some things could have been done better, some things could have been avoided completely, but when you talk to someone who has personally witnessed 184 women setting themselves on fire in protest to the way men are treating them you canââ¬â¢t help but admire the change today. With the help of US and various foreign countries, Iraq is rebuilding itself from the ground up, repairing itself from previous dictatorship. There are three major concerns in Iraq, political freedom (including freedom of religion), womenââ¬â¢s rights, and better education. These issues are far from being resolved, but they have also moved far from where they were before. According to President Bush, the US is looking to help ââ¬Å"build a government that answers to its people and honors their countryââ¬â¢s unique heritage.â⬠In doing so US troops are helping train military forces and elect leaders, who interestingly enough 85 are women, this coming from a country that dismissed womenââ¬â¢s rights. Iyad Allawi, Iraq's Interim Prime Minister believes ââ¬Å"that the unity of the country will be enhanced [and] will be strengthened by the process of an election.â⬠The new government will consist of a 275 member Transitional National Assembly, a Presidency council, provincial councils and a Kurdistan National Assembly. Currently Iraq is working under a Interim constitution, b...
Tuesday, September 3, 2019
Genesis, the Education of Abraham Essay -- Holy Bible Genesis Essays
Disillusioned Latin students, who cringe at the thought of repeatedly scribbling their grammar, are often told by their teachers, "Per repitio nos studiare," which translates to "through repetition we learn." Though this may seem hard to believe as their hands begin to cramp, it bears a certain amount of truth. As my grandfather once told me, "Experience is often the best teacher." Truly gaining an understanding of something often comes from repeated involvement. Repetition is also the concept that the Hebrew Creator-God uses throughout the story of Genesis to educate Abram about God's purpose and His nature. God is aware of the doubtful and cynical nature of Abram. Over time, God uses Abram's own repeated mistakes to build a conceptual understanding of Himself for Abram. This model provides Abram with a relevance for God in Abram's own life. Though the classic view depicts the patriarch Abraham as blindly, obedient, there is significant evidence within the story of Abraham to show that he was not so naturally submissive. The text often depicts Abram as doubtful, indignant, and sarcastic to a fault. Taking this side of the text in context illustrates Abraham as the antagonist in a battle against God. In this struggle with God, Abraham achieves excellence by learning, through repetition of his own errors and the reinstatement of God's promise, that it is in his best interest not to fight against his own personal idea of God, but to recognize, respect, and accept the true will of God. The story of Abram begins when, at age 75, he is called by God to leave his home and all that is familiar to him. In return God promises: "I will make of thee a great nation, and I will bless thee, and make thy name great; and thou shall be b... ...ith the Creator-God, but with his misconception of the relationship that must exist between himself and God. Through his repeated disrespect and misunderstanding of who God is Abraham learns about his faith, his God, and himself. Although it may seem trivial, there is a legitimacy in asking a Latin student to rewrite a 300 page grammar book 300 times. The legitimacy lies in the fact the student will learn the Latin, even though he may have a cramped hand. Much like the Latin students, Abraham learns the to recognize respect, and accept the will of God through a repetitious cycle that brings him a cramped ego. Surely he would agree with the Latin scholars when they say "Per repitio nos studiare." Work Cited The Holy Bible, King James Version. Cambridge Edition: 1769; King James Bible Online, 2015. Web. 28 June 2015. http://www.kingjamesbibleonline.org/.
Monday, September 2, 2019
Threatening Forces
Threatening forces are every where we look in life. Almost anything could be considered a threat in today s society. The poem by James Joyce, I hear an Army Charging Upon the Land, contains evidence of a threatening force. The threatening force in this poem is punk rock kids at a punk rock show. Threatening forces are very apparent in this poem. A prime example of one is when he says Arrogant, in black armor. He is talking about kids in leather jackets. It is there way of proving they are punk and it looks threatening. Seeing people in leather jackets is scary, especially when society has trained us to think that black is a sign of. We have been trained to think that anything that stands out is scary and people in black leather jackets stick out like a sore thumb. Obviously, when James Joyce says in black armor, it is a threatening force of punk rock. Punk rock is a very firm theme of this poem that is supposed to be menacing. This is established when it says, Clanging, Clanging upon the heart as upon an anvil. This is saying how he feels that the chains that the kids wear are frightening. He feels that the sound of their chains dangling together is intimidating. When people who wear chains run the often make a loud noise and if you wear more than one, which most people do, it makes an extremely loud noise which can be demoralizing. Clearly, the sound of the chains clanging together is a threatening sound. The people who listen to punk rock music are a reoccurring theme of peril. The threatening force of punk rock is extravagant when James Joyce says; They come out of the sea and run shouting by the shore. This is talking about them after a concert and how they are rowdy. Them coming out of the sea is when they come out of the mosh pit, out of the sea of people. After this they are often rowdy with the little energy they have left over. They are talking loudly because their hearing was just blasted by the loud music. People who are in a really good mood and acting a bit rowdy are often seemed to be dangerous especially if they are yelling. Evidently, punks after a concert are considered a threatening force to society. The poem, I Hear an Army Charging Upon the Land, is about the threat that punk rock supposedly puts on our society. Society is chained to its belief that anything different is threatening. Even though most of these people are not the least bit scary. It is hard to believe that, when the leaders of society, like the police, are always blaming the problem of on these types of people. Is punk rock really a threatening force in society or just a way that we have been brain washed to fear change and difference?
Sunday, September 1, 2019
A rose for emily: reader response Essay
William Faulknerââ¬â¢s short story ââ¬Å"A Rose for Emily,â⬠is very interesting and unusual. My first reaction after reading the entire short story was just complete shock that anyone can be capable of something so gross to put it simply. When reading through the story, it is written in a very confusing way. The reader has to be actively reading the story or you will miss something which I did the first time reading through it. I was lost until I got to the end and understood the way the author structured the story. I was challenged as a reader at times because the story was written out of order on purpose. Being written the way it was, the story gets a more interesting edge and pulls the reader in, it intrigued me a lot. After reading it a second time the reader can see that certain events are foreshadowed throughout the entire story. What is clear in this story is that if one shelters a child all their life, they will never develop emotionally or socially as a result, and people with this background can be prone to unpredictable behavior without the proper guidance. Emily is sheltered a lot as a child by her father. She wasnââ¬â¢t allowed to do much of anything. She was always expected to behave honorably being of high status in the community. Like most fathers who think nobody is good enough for their daughters, he chased away every boy that ever tried to court Emily. She was so attached to her father, so when he died she couldnââ¬â¢t bring herself to believe it. She held his decaying body in their house for three days because she was in such denial. Her father was the only person she had ever really had, and he was all she knew. People should have worried about her then but they just brushed it off and believed ââ¬Å"that with nothing left, she would have to cling to that which had robbed her, as people willâ⬠(223). That should have been a sign of going down the wrong path. It is one thing to grieve and hold onto a person in your heart, but to physically keep the body in your house like nothing has happened is insane. That was the first sign of her mental issues to me. Emily was left alone with absolutely no hope, and no way of knowing how to be a member of society. This work can beà interpreted in different ways, but what stands out to me is a child being sheltered and protected so much by her parent that she never knows freedom or how to live on her own. Emily never develops emotionally or socially due to her fatherââ¬â¢s overbearing nature. She didnââ¬â¢t know how to interact very well with others and once everything she was attached to was gone she went off the deep end. She had a love interest named Homer and it seemed like everything was going good, until one day Mrs. Emily went to the store to buy rat poison and nobody ever saw Homer again. It was believed he just went back north, but later we learn the truth that Emily killed him. She had his dead body in a bed upstairs that she would lie next to. She didnââ¬â¢t know how to survive alone so when someone else came into her life she wasnââ¬â¢t going to let them get away. Having nothing in life drove her mental, she did the only thing she knew to do. She didnââ¬â¢t know what real love was or what was appropriate. So desperate not to be alone and have the happily ever after her father deprived her of, she would kill for it. Even the people in the town felt Emily was off, believing she was crazy and saying she would kill herself (224). She never was taught how to love the right way and how to interact socially because of her father and it stunned her development in a bad way. Even though this text is almost a century old, it can reflect in the times now. The text is written back in the 1930ââ¬â¢s, so people donââ¬â¢t really hear much of an old lady killing a man to be her husband, thatââ¬â¢s just outrageous behavior. The same problem arises as in Emilyââ¬â¢s story as with some of the things that people do now though. People like Emily grow up in a box. When a person is in a box all their life and finally get out they go crazy. Whether that be partying until the crack of dawn or murdering people to satisfy their own desires like Emily did. It all could have been avoided if she was given the right tools and guidance to navigate through life but she wasnââ¬â¢t prepared so she coped the only way she knew how. Her behavior cannot be justified but it can be understood. This happens with a lot of people in current times. We see it a lot with teens and young adults if they grow up in a home with many rules and beyond strict expectations, as Emilyââ¬â¢s father put on her. Iââ¬â¢ve seen it happen with my own eyes. A friend of mine was so sheltered and had no freedom. He was so overwhelmed he went off the deep end and got himself a gun. He started shooting people at random for his own reasons, only he knows, and in the end he ended up killing himself asà well. Like Emily he wasnââ¬â¢t guided properly, and did what he could to cope with the situation he was in. So we should really think about the things we put kids through at a young age because it could have a lasting effect the rest of their life and cause unpredictable behavior. Relating to this story is partly easy for me. I am included in this audience for this story because I know how it feels to be in a box. Feeling alone and having no hope left is something I know almost everyone can recall at some point in their life. I had an event change my life and it left me feeling absolutely hopeless and like nothing would ever be right ever again. The difference between when I hit rock bottom and when Emily hit is I had family and friends to help me through it and guide me to the right path but Emily didnââ¬â¢t. She never interacted with anybody but her father and, so when she had nothing left she went left instead of right. Having the right tools can make all the difference in life and Emily was never taught the tools so she invented her own, and that can happen to anyone. This work is geared toward parents but also the world to show one of the worst consequences of protecting a child so much it actually cripples them. Protecting your child can be a good and bad thing. Good in the sense they are protected from things no child should go through but bad because if they are sheltered to much their development emotionally and socially good be jeopardized. That can result in some unpredictable behavior that could have dire consequences if the child is not given the right tools. Parents have to find the balance so that they are not out of control but still get to learn some lessons to help them grow. If there is not balance some may just party hard all night long, but some may be so traumatized t hat the only way they know how to survive is by making sure they are never alone by doing the unthinkable, murder, and end up just like Emily.
Subscribe to:
Posts (Atom)